How to use the Stamppi™?
Dear Kiddies! Here you will find what you need to know to use your Stamppi™ stamp properly

After receiving your Stamppi™
After transport, the ink is poorly distributed in the pad. Let your Stamppi™ stand up for 2 hours before use, until the ink picks up evenly.

Before using on clothing
Before using the Stamppi™ dab on paper at least 10 times pressing gently, until the impression is perfect.

Dab on garment
This is the time to dab your child's garment, make sure you are on a flat surface (table) and the fabric is thick enough cotton/modal.

Dark or thin clothes
Cut 5-6 cm of iron-on tape and use an iron or straightener to fix it to the garment. Once cooled, you can dab.
Our recommendations before use
TO DO
After a period of transport, your Stamppi™ has been shaken a little in all directions.
Leave it standing for two hours until the ink is evenly distributed in the pad.
Dab on a sheet of paper to discharge excess ink before using on clothing. You can dab up to 1000 times.
Use iron-on tape on dark, thin garments.
Print lasts up to 50 washes
NOT TO DO
Do not dab on a garment that is too thin, it may come through, use the iron-on tape.
Do not dab on synthetic materials such as nylon or labels inside the garment. Some materials will absorb the ink like a sponge instead of settling.
Do not dab on a soft surface otherwise the impression will not appear completely, do it on a table for example.
Still need help?
Do not hesitate to ask us all the questions you need.
Our customer service will be happy to answer you, click below to contact them.